Emergency Eye Flush Bottle

An eye flush bottle designed to assist with rinsing the eye following exposure to dust, small particles, or splashes of irritating substances. It features a squeezable body, a shaped head for positioning around the eye, and instructions printed on the bottle.

Use with an appropriate eye-rinsing fluid as specified by the manufacturer. The bottle provides supplementary immediate rinsing and does not replace a required emergency eyewash station in workplaces with chemical hazards.

1. Shaped head for directing rinsing fluid toward the eye.
2. Squeezable body for manual flow control.
3. Handheld design.
4. Instructions printed on the bottle.
5. Distinctive white body and green rinsing head.
6. Supplementary equipment for initial emergency response.

1. To assist with initial eye rinsing when dust or small particles enter the eye.
2. To help begin rinsing following splashes of irritating substances.
3. To serve as supplementary equipment within workplace first-aid provisions.
4. To be used with an appropriate eye-rinsing fluid according to the manufacturer’s instructions.
5. Not intended to treat eye diseases or replace medical assessment.

1. Open the protective cap.
2. Position the eye over the eye cup.
3. Squeeze the bottle gently to release the solution.
4. Flush the affected eye continuously.
5. Seek medical assistance if irritation persists.

1. 1 × Emergency Eye Flush Bottle.

1. For external eye rinsing only.
2. Use an appropriate eye-rinsing fluid as specified by the manufacturer. Do not add chemicals or homemade saline.
3. Do not touch the fluid outlet or press the head against the eye’s surface.
4. Do not rub the eye or attempt to remove an embedded object.
5. Seek urgent medical attention for exposure to a strong chemical, changes in vision, or a penetrating eye injury.
6. Do not use the bottle as a replacement for a required emergency eyewash station for chemical hazards.
7. Do not assume the bottle is reusable or sterilizable unless the manufacturer explicitly states this.

1. Store in a clean, dry place away from direct sunlight and heat sources.
2. Protect the rinsing head from dust and contamination according to the manufacturer’s instructions.
3. Keep in a clearly identified, readily accessible location.
4. Inspect the bottle regularly for damage.
5. Follow the storage conditions and expiry requirements of the rinsing fluid.
6. Do not store filled fluid indefinitely; follow the manufacturer’s replacement instructions.