Turning Mat

Reusable patient turning mat measuring 70 × 110 cm, made from durable 600D Oxford fabric. Designed to assist caregivers in safely repositioning and transferring patients with reduced physical strain. Suitable for hospitals, clinics, and home-care environments.

• Durable 600D Oxford fabric with high tensile strength.

• Water-resistant and easy-to-clean surface.

• Reinforced full-width webbing handles.

• Supports up to 200 kg load capacity.

• Antimicrobial surface treatment.

• Lightweight and foldable design (approx. 0.6 kg).

• Radiolucent material compatible with X-ray procedures.

• To assist caregivers in moving and repositioning a patient on a bed.
• To assist with transfers between suitable surfaces, according to the patient’s condition and approved care plan.

1. Place the mat flat under the patient between the sheet and mattress.
2. Ensure at least two caregivers are present for safe handling.
3. Grip the handles firmly and reposition the patient slowly.
4. After use, remove the mat and proceed with cleaning and disinfection.

• 1 × Turning Mat.

• Inspect for tears or damage before each use.
• Do not exceed maximum load capacity (200 kg).
• Avoid contact with sharp objects or open flames.
• Disinfect thoroughly after each patient use to prevent cross-contamination.

• Store the sheet flat or rolled in a clean, dry place.
• Keep it at a temperature between 5 and 40 °C, with relative humidity below 70%.
• Keep it away from direct sunlight, heat sources and chemical solvents.
• Allow it to dry completely before storage; do not store it while damp.
• Keep it away from sharp objects and avoid placing heavy items on the handles.
• Inspect the sheet, handles and stitching before reuse.